Can I turn my power back on after water got into the panel?

Not until it has been checked. Water can leave corrosion and debris that cause a fault later. Equipment that was submerged usually needs to be replaced.

A car hit our meter. Who do I call?

If there is any danger, call 911. Call PG&E about the meter and service drop. Call us for the electrical equipment on your side, such as the meter base, mast and panel.

Lightning struck nearby and some outlets quit. What happened?

A surge can damage GFCI outlets, breakers, and electronics. We test the circuits, replace damaged parts, and can talk with you about surge protection at the panel.

Will you work with my insurance company?

We document what we find and what we repaired with photos and a written summary. Coverage decisions are between you and your insurance company.

Do I need a permit for storm repairs?

Some repairs, like replacing a panel or meter base, often need a permit. We tell you what applies to your job before we start.

Is my outdoor wiring safe after a wind storm?

Check for torn covers, loose conduit, and exposed wire. If you see any, keep people away and call us to make it safe.

Storm or flood electrical damage 24/7 ELECTRICAL SERVICE License #1116554

Storm damage electrician in Bakersfield

Looking for a storm damage electrician in Bakersfield? Wind, rain, a lightning strike, rising water, or a car hitting a pole or meter can damage the electrical system in ways you cannot see. We help you decide what is safe to turn back on, make the damaged equipment safe, and repair it so power can be restored.

Call (661) 293-0213 now Request help online Back to emergency hub

Book storm damage repair in Bakersfield

For the fastest response, give us a call. Want a quote in writing or prefer to schedule online? Pick what works best for you.

Talk to an electrician I would just like a quote

Easily schedule online

Schedule storm damage repair online

Add your name and phone number and we’ll take you to scheduling.

For fire, smoke, or injury, call 911 first. Then (661) 293-0213 for the electrical side.

After a storm, flood, or impact

Water and electricity do not mix, and impact damage can loosen the service mast, meter base, or wires inside the panel. The safest move is to have the equipment checked before it is turned back on.

Water reached outlets, a subpanel, the main panel, or appliances like a water heater or HVAC unit.
The service mast, weatherhead, or meter base is bent, pulled away from the wall, or hit by a tree limb or vehicle.
Lightning struck nearby and outlets, GFCIs, or electronics stopped working.
Wind tore off an outdoor light, outlet cover, or conduit and left wiring exposed.

What we ask after damage

What happened: wind, flooding, lightning, a fallen tree, or a vehicle?
Did water touch any electrical equipment, and is it still wet?
Is the power on, off, or partly on right now?
Has PG&E been out yet, or is there a downed line?

What we look at after a storm or flood

Some damage needs replacement, not drying out. We tell you which is which.

Service mast and meter base

We check that the mast, straps and meter base are secure and not cracked. Damage on this part may need utility coordination before power is restored.

Panels and breakers that got wet

Breakers and panels that were under water are generally replaced, not reused. We assess what was submerged and what stayed dry.

Outlets, GFCIs and outdoor circuits

We test GFCI protection and outdoor circuits, and replace devices that were wet or damaged by a surge.

Damage report for your records

We can photograph what we find and list what we repaired so you have it for your insurance claim.

Before anything is turned back on

Stay out of standing water if any electrical equipment or cords may be in it.
Do not turn on breakers or appliances that were wet until they are checked.
Stay well away from downed or sagging lines and call PG&E.
Take photos of the damage before cleanup if it is safe to do so.

We also provide storm or flood electrical damage in these areas

We handle storm, flood and impact damage calls from Bakersfield across our Kern County service area. Tap a city for local details.

What our clients have said about our storm or flood electrical damage

Real 5-star Google reviews from customers who needed help fast. Tap a card to read the full review.

5 out of 5 stars

“I reached out to ASAP for a quote to install an outlet on my commercial roof so I could install Christmas lights for my business. Their team came out and gave us a…”

E Sal
Read this review

5 out of 5 stars

“They came the same day within a few hours. Service was fast and the price was reasonable.”

Carey Knox
Read this review

5 out of 5 stars

“Came in emergency. Handled everything perfectly. Will use again. Literally one of the best 24 hr electrical places we've hired”

REBECCA ROGERS
Read this review

Storm and flood damage questions

Can I turn my power back on after water got into the panel?: Not until it has been checked. Water can leave corrosion and debris that cause a fault later. Equipment that was submerged usually needs to be replaced.
A car hit our meter. Who do I call?: If there is any danger, call 911. Call PG&E about the meter and service drop. Call us for the electrical equipment on your side, such as the meter base, mast and panel.
Lightning struck nearby and some outlets quit. What happened?: A surge can damage GFCI outlets, breakers, and electronics. We test the circuits, replace damaged parts, and can talk with you about surge protection at the panel.
Will you work with my insurance company?: We document what we find and what we repaired with photos and a written summary. Coverage decisions are between you and your insurance company.
Do I need a permit for storm repairs?: Some repairs, like replacing a panel or meter base, often need a permit. We tell you what applies to your job before we start.
Is my outdoor wiring safe after a wind storm?: Check for torn covers, loose conduit, and exposed wire. If you see any, keep people away and call us to make it safe.