commercial electrical repair 24/7 ELECTRICAL SERVICE License #1116554
Motor controls & disconnects repair in Bakersfield
Starter chatter, single-phasing symptoms, and disconnects that will not isolate get opened under lockout, inspected for heat damage, and repaired to a clean point of demarcation with your motor shop.
Based in Bakersfield. We travel across Kern County, including Rosedale, Lamont, Arvin, Shafter, Wasco.
How can we help you?
Fastest path is a call. If you prefer, tap below and we will reach out.
For fire, smoke, or injury, call 911 first. Then (661) 293-0213 for the electrical side.
Motor controls & disconnects repair
For motor controls & disconnects repair we troubleshoot on site, quote what we think it needs, and stock common parts when we can. If it is bigger than a quick fix, you get the number before we open up more.
- Isolate the circuit, test, and show you the failure point when it is not obvious.
- Repair or replace what failed; we flag other wear if you want it handled while we are there.
- Walk through what we changed before we leave—no “it should be fine” without a quick check.
What to do next
Call or use the form at the bottom. A sentence on what changed and when beats “it just stopped”—we route the right tech and a realistic window.
- What changed and what is not working right now
- Any buzz, heat, or burnt smell happening now (say yes outright)
- A quick photo of the problem fixture or switch (optional but helps)
When to call for a repair
It worked yesterday
Sudden failures often point to a loose connection, worn device, or a breaker issue - we isolate it fast.
Intermittent problems
Flicker, random trips, or devices that “sometimes” work are diagnosable with the right tests and patience.
Warm, buzzing, or burning smell
Stop using the circuit and call. These can indicate an unsafe connection or failing component.
Need us soon? Use the callback form below or call now. If you smell burning or see sparks, skip the form and dial dispatch.
Our repair process
Step 1
Diagnose
We isolate the issue, test safely, and confirm the real failure point.
Step 2
Repair
We fix or replace the right component and address any unsafe wiring or terminations we find.
Step 3
Verify
We test operation under normal use so you are not left guessing after we leave.
Service areas
We also provide motor controls & disconnects repair in these areas
From Bakersfield, we schedule repair calls across Kern County. Tap a city for local electrician info.
What our clients have said about our motor controls & disconnects repair
Three Google clips matched to work like yours; tap a card for the full wording online.
5 out of 5 stars
“Our power went out with a bad breaker, it was 7pm at night, Electrical ASAP was totally that they were so fast to the rescue! I would totally recommend them!!”
5 out of 5 stars
“Thank you very much to Electrical ASAP. I am very pleased with the work done on my electrical panel. The service was of excellent quality, highly professional, and reasonable price. I am extremely satisfied with their work.”
5 out of 5 stars
“These guys came on a Monday morning after our breaker box was vandalized. It was an emergency and they found a way to fit us in. I don’t know what we would have done if they didn’t see how much we needed their services, ASAP.”
FAQ
Repair questions
How do you start a motor controls & disconnects repair visit at a commercial site?
We confirm access rules and shutdown windows, then isolate and test before swapping parts. Findings are written in plain language for Bakersfield facilities teams—photos and meter readings when they help decisions.
Do you take jobs like this in our area?
Yes. We are licensed and insured, based in Bakersfield, and schedule motor controls & disconnects repair work across the county. Request a quote online or call for the next open slot.
Are you licensed and insured?
Yes. We are licensed and insured for residential and commercial electrical work.
Do you offer free estimates?
Free estimates are available for many planned installs and upgrades. Troubleshooting and diagnostic visits can be priced differently - we explain what to expect before we schedule a visit.
What should I send so you can quote without a long back-and-forth?
Photos, safe access to the panel when possible, and a short note on the goal or symptom. If a permit is in play, we spell out the sequence before we start.
Do you warranty your repair workmanship?
We stand behind workmanship on the repairs we perform. If something we fixed fails because of our work, we make it right. Call us and we will review what happened.
What if the problem comes back after the visit?
Intermittent issues sometimes need a second look. Tell us what changed and when and we bump repeat concerns on the same circuit.
Can you work evenings or weekends?
Emergency calls are 24/7. Planned repairs are scheduled in normal windows when possible. When you call we spell out what openings exist.
Will you share photos of what you found?
Yes, when it helps you decide. Many customers want a clear picture of a damaged device, loose neutral, or overheated termination.
How long do most repairs take on site?
Simple swaps can be an hour or two. Diagnostics for mystery trips can take longer because rushing tests creates wrong fixes.
Related articles
Planning repairs, inspections, and upgrades in Kern County.
Apr 29, 2026
Indoor vs outdoor EV charger installs: what to know
Garage vs driveway, weather-rated equipment, conduit routing, and what changes the price.
Read article: Indoor vs outdoor EV charger installs: what to know
Apr 29, 2026
Hardwired vs plug-in EV chargers: which is right for you?
NEMA 14-50 vs hardwired, code rules above 40A, and why receptacle quality matters.
Read article: Hardwired vs plug-in EV chargers: which is right for you?
Apr 24, 2026
Why does my breaker keep tripping?
Common causes, warning signs, and when repeated breaker trips need a licensed electrician.
Read article: Why does my breaker keep tripping?Related service pages
Other list pages in the same service family—open a page for details and next steps.
Control panel wiring
Control panel wiring in Bakersfield, CA and Kern County. Tenant panels, bus limits, and selective shutdowns that protect revenue during upgrades. Licensed electricians for industrial control panel electrician and electrical control panel build. Request a quote or call to schedule service.
View service: Control panel wiring
High-voltage connections (where you offer them)
High-voltage connections (where you offer them) in Bakersfield, CA and Kern County. Utility coordination, PPE discipline, and clear ownership on who handles which part of the system. Licensed electricians for high voltage electrical contractor and industrial high voltage wiring. Request a quote or call to schedule service.
View service: High-voltage connections (where you offer them)
Industrial equipment electrical fault finding
Industrial equipment electrical fault finding in Bakersfield, CA and Kern County. Ground faults, cord cap damage, and branch events under load—documented with photos before mechanical trades tear into the machine. Licensed electricians for equipment ground fault electrician and production line electrical troubleshooting. Request a quote or call to schedule service.
View service: Industrial equipment electrical fault findingGet it fixed the right way
Request service online or call. We route you toward the safest next step for your home or business.