commercial electrical repair 24/7 ELECTRICAL SERVICE License #1116554
Exit and emergency lighting repair & testing in Bakersfield
Monthly function tests, battery failures, and heads that drop below code get documented for your log—then repaired or grouped into a planned swap. We separate quick fixes from full retrofits before we order.
Based in Bakersfield. We travel across Kern County, including Rosedale, Lamont, Arvin, Shafter, Wasco.
How can we help you?
Fastest path is a call. If you prefer, tap below and we will reach out.
For fire, smoke, or injury, call 911 first. Then (661) 293-0213 for the electrical side.
Light fixture repair
Still dark after a fresh bulb? Usually it is the socket tab, a dimmer that does not like the LED you picked, or a splice in the canopy getting hot. We kill the circuit, open the fixture, and test from there.
- Inspect socket, grounding, and wire nuts in the canopy—especially on older aluminum-to-copper pigtails.
- Match dimmers and drivers when flicker or buzz shows up after a bulb swap.
- Hang the fixture level, torque mounting screws, and confirm ground before we leave.
What to do next
Call or use the form at the bottom. A sentence on what changed and when beats “it just stopped”—we route the right tech and a realistic window.
- What changed and what is not working right now
- Any buzz, heat, or burnt smell happening now (say yes outright)
- A quick photo of the problem fixture or switch (optional but helps)
When to call for a repair
It worked yesterday
Sudden failures often point to a loose connection, worn device, or a breaker issue - we isolate it fast.
Intermittent problems
Flicker, random trips, or devices that “sometimes” work are diagnosable with the right tests and patience.
Warm, buzzing, or burning smell
Stop using the circuit and call. These can indicate an unsafe connection or failing component.
Need us soon? Use the callback form below or call now. If you smell burning or see sparks, skip the form and dial dispatch.
Our repair process
Step 1
Diagnose
We isolate the issue, test safely, and confirm the real failure point.
Step 2
Repair
We fix or replace the right component and address any unsafe wiring or terminations we find.
Step 3
Verify
We test operation under normal use so you are not left guessing after we leave.
Service areas
We also provide exit and emergency lighting repair & testing in these areas
From Bakersfield, we schedule repair calls across Kern County. Tap a city for local electrician info.
What our clients have said about our exit and emergency lighting repair & testing
Three Google clips matched to work like yours; tap a card for the full wording online.
5 out of 5 stars
“Our power went out with a bad breaker, it was 7pm at night, Electrical ASAP was totally that they were so fast to the rescue! I would totally recommend them!!”
5 out of 5 stars
“Thank you very much to Electrical ASAP. I am very pleased with the work done on my electrical panel. The service was of excellent quality, highly professional, and reasonable price. I am extremely satisfied with their work.”
5 out of 5 stars
“These guys came on a Monday morning after our breaker box was vandalized. It was an emergency and they found a way to fit us in. I don’t know what we would have done if they didn’t see how much we needed their services, ASAP.”
FAQ
Repair questions
How do you start a exit and emergency lighting repair & testing visit at a commercial site?
We confirm access rules and shutdown windows, then isolate and test before swapping parts. Findings are written in plain language for Bakersfield facilities teams—photos and meter readings when they help decisions.
Do you take jobs like this in our area?
Yes. We are licensed and insured, based in Bakersfield, and schedule exit and emergency lighting repair & testing work across the county. Request a quote online or call for the next open slot.
Are you licensed and insured?
Yes. We are licensed and insured for residential and commercial electrical work.
Do you offer free estimates?
Free estimates are available for many planned installs and upgrades. Troubleshooting and diagnostic visits can be priced differently - we explain what to expect before we schedule a visit.
What should I send so you can quote without a long back-and-forth?
Photos, safe access to the panel when possible, and a short note on the goal or symptom. If a permit is in play, we spell out the sequence before we start.
Do you warranty your repair workmanship?
We stand behind workmanship on the repairs we perform. If something we fixed fails because of our work, we make it right. Call us and we will review what happened.
What if the problem comes back after the visit?
Intermittent issues sometimes need a second look. Tell us what changed and when and we bump repeat concerns on the same circuit.
Can you work evenings or weekends?
Emergency calls are 24/7. Planned repairs are scheduled in normal windows when possible. When you call we spell out what openings exist.
Will you share photos of what you found?
Yes, when it helps you decide. Many customers want a clear picture of a damaged device, loose neutral, or overheated termination.
How long do most repairs take on site?
Simple swaps can be an hour or two. Diagnostics for mystery trips can take longer because rushing tests creates wrong fixes.
Related articles
Planning repairs, inspections, and upgrades in Kern County.
May 1, 2026
How much does it cost to relocate an outlet?
Distance, wall type, and when a new homerun is the right call for Bakersfield homes.
Read article: How much does it cost to relocate an outlet?
May 1, 2026
Can I move a light switch to the other side of a wall?
Single-pole vs 3-way moves, attic access, and neutral requirements for smart switches.
Read article: Can I move a light switch to the other side of a wall?
May 1, 2026
Relocating a 240V dryer or range outlet
Breaker sizing, NEMA configurations, and inspection-friendly installs in Kern County.
Read article: Relocating a 240V dryer or range outletRelated service pages
Other list pages in the same service family—open a page for details and next steps.
Backup generator service & repair
Backup generator service & repair in Bakersfield, CA and Kern County. Battery, charger, exercise, and transfer-path faults traced with logs—service visits that do not stop at “try it again Monday.” Licensed electricians for standby generator service and generator transfer switch repair. Request a quote or call to schedule service.
View service: Backup generator service & repair
Backup generator systems
Backup generator systems in Bakersfield, CA and Kern County. Interlocks, transfer gear, and load management so backup power is legal and dependable. Licensed electricians for standby generator commercial and generator maintenance. Request a quote or call to schedule service.
View service: Backup generator systems
Commercial electrical repairs
Commercial electrical repairs in Bakersfield, CA and Kern County. Downtime-aware triage for retail, offices, and light industrial—documented findings and phased fixes. Licensed electricians for commercial electrician and emergency commercial electrician. Request a quote or call to schedule service.
View service: Commercial electrical repairsGet it fixed the right way
Request service online or call. We route you toward the safest next step for your home or business.